Using hold, conference and transfer, Placing a call on hold, Conferencing – Uniden DCT738 User Manual
Page 35: Placing.a.call.on.hold conferencing
34
Using Hold, Conference and Transfer
Placing a Call on Hold
To.place.a.caller.on.hold,.press.[xfer/intercom].on.the.handset,.[hold].on.the.base..If.you.leave.a.caller.on.hold.for.
more.than.ten.seconds,.the.display.will.read,.LINE.ON.HOLD.in.the.handset.display.
To.return.to.the.party.on.hold,.press.[
/flash].or.[ ].on.a.handset.or.[speaker].on.the.base.
Note: You can only place a caller on hold for 5 minutes. Once 5 minutes have passed, the caller will
be disconnected and the phone will return to standby.
While a call is on hold, Caller ID and Call Waiting can not be received.
Conferencing
If.you.have.more.than.one.handset,.up.to.four.people.can.participate.
in.a.conference.call..A.three-way.conference.call.consists.of.an.
outside.line.and.two.stations..A.four-way.conference.call.consists.of.
an.outside.line,.the.base.speaker.phone,.and.two.handsets..You.can.
easily.join.a.call.already.in.progress.
From.the.handset,.press.[
/flash].or.[ ].to.join.the.call..From.the.
base,.press.[speaker]. You.can.hang.up.normally;.the.other.station.
will.still.be.connected.to.the.call.
Outside call
Handset #1
Handset #2
Base
Outside call
Handset #1
Handset #2
Base