Uniden ANA 9310 - Manual (Page 39)

Using Your ANA 9310 Base Unit
Although most of the ANA 9310 operations are performed at the
Handset, there are two operations performed at the Base Unit.
The status LED (2) blinks whenever the Handset is connected to
a call.
Using the Hold
The hold button (1) is used in conjunction with a desk top phone to
switch from the Handset to a desk top phone.
1. If you need to use a desk top phone which the ANA 9310 is
connected to, press
hold on the Handset or on the Base unit
then pick up the desk top phone.
2. To resume using the Handset, press hold on the Base unit,
then press TALK on the Handset. The Handset resumes
functioning as before.
Using the Page/Find
The page/find button (3) is used to locate the Handset.
Pressing page/find will send a ring signal to the Handset.
Note: The Handset Ringer must be On and set to Type A, B or C in
order for the page/find function to work.
33
41
Y:...ANA9310 om.vp
Tue Dec 03 14:45:12 2002
Color profile: Disabled
Composite Default screen