Uniden ANA 9310 User Manual

Page 19

Text mode
Original mode

6. Place the Base Unit on the posts

of the wall plate and push down
until it’s firmly seated.

7. Plug the AC Adapter into a

standard 120V AC wall outlet.

Note: Do not use an outlet controlled by a wall switch.

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your phone
directly on a wall. Before mounting your phone, consider the following:

Select a location away from electrical cables, pipes, or other
items behind the mounting location that could cause a hazard
when inserting screws into the wall.

Make sure the wall material is capable of supporting the weight
of the Base Unit.

Use #10 screws with anchoring devices suitable for the wall
material where the Base Unit will be placed.

Y:...ANA9310 om.vp

Wed Dec 04 12:06:54 2002

Color profile: Disabled

Composite Default screen