Uniden ANA 9310 - Manual (Page 18)

Wall Installation
Standard Wall Plate Mounting
These Phones are designed to be mounted on a standard wall
plate. To attach the wall mount stand to the Base Unit:
1. Slide the Wall Mount stand
into the notches at the top of
the Base Unit, push the Wall
Mount stand down and snap it
into place.
2. Plug the AC Adapter into the Base Unit
as previously described.
3. Place the AC Adapter cord
inside the molded channel of
the Wall Mount stand.
4. Plug one end of the telephone cord into the LINE jack on the
Base Unit. Optionally, plug one end of a standard 2500 type
desk phone into the PHONE jack. Then place the telephone
cord(s) inside the molded channel(s) on the bottom of the Wall
Mount stand.
5. Plug the other end of the telephone cord into the modular
wall jack.
12
20
Y:...ANA9310 om.vp
Tue Dec 03 14:43:32 2002
Color profile: Disabled
Composite Default screen