Uniden DECT4086-4 - Manual (Page 5)

Place the phone on the wall
Place the mounting slots over the pins on the wall plate, and slide the
base
down to
lock it
into
place.
Setup the Handset(s)
Install the battery
Unpack all handsets, battery packs,
and battery covers. If any handset has
the battery cover already attached,
press in on the notch and slide the
cover down and off.
Line up the battery pack connector
with the jack inside the handset. (The
battery connector will only fit one way.)
Push the battery pack connector in
until it clicks into place. Tug gently on
the wires to make sure the battery
pack is securely connected.
Place
the
cover
over the battery compartment and
slide it up into place.
1.
2.
3.
4.
(To telephone jack
for second line)
(To telephone jack
for second line)