Uniden DECT4086-4 - Manual (Page 37)

Using the Answering System
Each line has a separate answering system. Whenever you access
the answering system, the phone prompts you to choose a line.
After that, any settings or operations will affect only the answering
system for that line. For example, deleting all the messages from the
answering system from line 1 does not affect any messages on the
answering system for line 2.
Setting Up Your Answering System
Recording your outgoing message
Your personal outgoing message or greeting can be between 2
seconds and 30 seconds long. If you don't want to record an outgoing
message, the system will use its pre-recorded greeting:
Hello, no one is available to take your call. Please leave a
message after the tone.
To record your greeting:
Open the menu and select Ans. Setup.
Select Line 1 or Line 2, then select Record Greeting.
Press
sTarT . Wait for the system to say "Record greeting" and
then and begin your recording.
When you're finished, press
sTop . The system plays back your
new greeting.
To keep this greeting, press
sTop again. To delete it and try
again, press DeLeTe .
Switch between the pre-recorded greeting and your greeting
Open the menu and select Ans. Setup.
Select Line 1 or Line 2, then select Greeting Options.
The system plays back the current greeting (personal or pre-
recorded) for this line. Press CHaNGe to switch greetings or sTop
to keep the current greeting.
1.
2.
3.
4.
5.
1.
2.
3.