Weak or hard to hear audio, Noise or static on the line – Uniden DECT4086-4 User Manual
Page 44
If…
Try…
I can’t hear the base
speaker.
Making sure call screening is turned on (see page
Changing the base speaker volume.
-
-
Messages are
incomplete.
The incoming messages may be too long. Remind
callers to leave a brief message.
Deleting messages (the memory may be full).
-
-
The system keeps
recording if I answer
on an extension.
You may have to change the line mode. Contact
customer service for more information.
-
I can't register a
handset.
Seeing if there are 10 handsets registered to this
base.
Resetting the handset.
-
-
My alarm rings at
the wrong time.
Making sure the time is set correctly (see page 18).
-
My alarm won't ring
on the right day(s).
Making sure the days are selected (see page 32).
Making sure the date is set correctly (see page 18).
-
-
Weak or Hard To Hear Audio
If a caller’s voice sounds weak or soft, the signal might be blocked by
large metal objects or walls; you might also be too far from the base,
or the handset’s battery may be weak.
Try moving around while you’re on a call or moving closer to the
base to see if the sound gets louder.
Make sure the handset’s battery is fully charged.
Try adjusting the earpiece volume.
Noise or Static on The line
oise or Static on The line
Interference is the most common cause of noise or static on a
cordless phone. Here are some common sources of interference:
electrical appliances, especially microwave ovens
computer equipment, especially wireless LAN equipment and DSL
modems