Uniden DECT4086-4 - Manual (Page 35)

Use the number keys to set the time you want the alarm to ring;
press ok when you're finished.
Highlight the repeat setting and press seLeCT . Select how often
you want the alarm to ring—once only (1 time), every day (Daily),
or on a weekly basis (Select Days)—then press ok .
If you choose Select Days, the handset prompts you to choose
which days of the week the alarm
should ring. To choose a day,
highlight it and press seLeCT ; a
check mark appears beside that to
show that it is selected. Select as
many days as you want, then press
ok . The alarm will ring on each day with a check mark beside it.
Highlight the ringer setting and press seLeCT .
Select the ring tone you want the alarm to use, then press ok .
When you are finished setting all
the alarm options, press seT to
activate the alarm. The time and
repeat setting will show on the
main Alarm Setting screen. (If you
selected specific days, the repeat
setting displays as Weekly.)
When an alarm rings
When the day and time on the phone
matches the day and time of an alarm
setting, the handset sounds the
selected tone and displays the alarm
screen.
The alarm will ring for one minute. To turn off the alarm, press
eND . When the phone prompts you to confirm, press Yes .
To temporarily turn off the alarm, press sNooze (or just let the
alarm ring for the full minute). The alarm will ring again in five
minutes.
To cancel snooze, press eND the next time the alarm rings. When
the phone prompts you to confirm, press Yes .
5.
6.
7.
8.
9.
10.



Select Days
Monday
Tuesday
OK SELECT BACK
Select Days
Monday
Tuesday
OK SELECT BACK
Alarm Setting
08:00AM Weekly
Alarm2
OK BACK
Alarm Setting
08:00AM Weekly
Alarm2
OK BACK
Alarm
SNOOZE
Alarm
SNOOZE