Uniden DECT4086-4 - Manual (Page 40)

To... From the base
From a handset (during
remote operation)
replay previous
messages
Press PHoNEBooK/lEFT repeatedly
until you hear the message you
want to replay.
Press 1 repeatedly until
you hear the message
you want to replay.
skip a message Press CAllEr ID/rIGHT . Press 3 .
delete a
message
While the message is playing,
press DElETE .
While the message is
playing, press 4 .
delete all of your
messages
With the phone in standby, press
DElETE . When the system prompts
you to select a line, press lINE1
or lINE2 .
Not available.
play old
messages
After the system plays the new messages,
press
PlAY/SToP again. When the
system prompts you to select a
line, press lINE1 or lINE2 .
press 2 .
exit the system Press PlAY/SToP . Press END .
Screening Your Calls
Another feature your answering system gives you is call screening.
While the system is taking a message, you can hear the caller on the
base speaker (if you turn on Call Screen) or from a handset.
To... From the base From a handset
hear the caller
leaving a message
Just listen to the caller over
the speaker.
Press SCrEEN .
answer the call Press SPEAKEr . Press TAlK/FlASH .
mute the call screen
without answering
Press mUTE .
If you mute the call screen, the system continues taking the
message: it just stops playing through the speaker.
Up to four handsets at a time can screen calls. If a fifth handset
tries to screen the call, the handset sounds an error tone and
displays a System Busy message.

