beautypg.com

Uniden DECT4086-4 User Manual

Page 23

background image

primary line assignment by manually choosing line for your current

task.
To assign a primary line, open the menu and select Handset Setup or

Base Setup. Select Primary Line, then choose the line you want this

station to connect to when it goes off hook:

Line 1

Always connect to line 1, regardless of either line's status.

Line 2

Always connect to line 2, regardless of either line's status.

Auto

(default

setting)

Connect to line 1 except under the following circumstances:

there is an incoming call on line 2

there is a holding call on line 2

the answering system has picked up line 2

line 1 is being used for an active call or for screening a call

If any one of these conditions is true, the station connects to line 2.

-

-

-

-

Conferencing two lines together

When you have active calls on both lines, you can join the two lines

together in a conference call.

Place the first call on hold.
Switch to the other line and start the second call.
Press

MeNu

, then select Conference.

During a conference call, you can speak with both outside callers

at the same time, and the callers can speak with each other.

To separate the conference call back into two independent calls,

press the soft key for either line. The other line is automatically put

on hold, and you can switch between calls normally.

To disconnect both callers at the same time, just hang up

normally.

To disconnect one caller at a time, select the line you want to

disconnect, then hang up. Press the soft key to return to the other

caller (on hold).

other stations can also join in the conference call. see Using

Multi-station Features on page 29 for more information.

1.
2.
3.

This manual is related to the following products: