Uniden DECT4086-4 - Manual (Page 28)

Using the Phonebook
Each station can store up to 100 entries in its phonebook, and each
entry can have two different phone numbers.
Open the phonebook Press PHoNEBooK/lEFT.
Scroll through the
entries
Press DoWN to scroll through the phonebook from A
to Z or UP to scroll from Z to A.
Jump to entries that
start with a certain
letter
Press the number key corresponding to the letter you
want to jump to.
Quick dial the
primary number for
an entry
Find the entry you want to dial.
To dial with the primary line for this station, press
TAlK/FlASH or SPEAKEr ; to manually choose a line,
press lINE1 / lINE2 . The phone automatically dials
the number in the first phone number slot.
1.
2.
Dial either number
for an entry
Find the entry you want to dial and press SElECT .
Select one of the two phone numbers for that
entry.
To dial the number with the primary line for this
station, press TAlK/FlASH or SPEAKEr ; to manually
choose a line, press lINE1 / lINE2 .
1.
2.
3.
Use a speed dial
number to open a
phonebook entry
On the dial pad, press and hold the number assigned
to the phonebook entry you want. The phone opens
the phonebook and goes directly to that entry. Follow
the instructions for dialing an entry above.
Close the phonebook
On the handset, press END ; on the base, press mUTE/
ExIT . (If you open the phonebook during a call, press
BACK to back out without hanging up.)
Setting Up Your Phonebook
Creating a new entry
Open the phonebook with the phone in standby, and press New .
The phone walks you through the phonebook entry items in the order
listed below. On each screen, press ok when you're finished editing
the item or if you want to skip the item:
Edit Name
Enter the name (up to 16 characters) you want to use for this
entry.