Uniden D3580 - Manual (Page 5)

English - 5
To test the connection
1. Pick up the handset from the cradle.
2. Dial the number you want to call, then press
cell on the handset. You may not
hear a dial tone or ringing, but the handset display says Talk.
3. Make sure the call connects and you can hear clearly. (When you’re finished,
press end to hang up.)
♦ The D3580 remembers the pairing information for your cellular; if it loses
connection with your phone for any reason (e.g., the cell phone travels out of
range, runs out of charge, etc.), the D3580 can automatically reconnect the
next time your phone becomes available.
Using the D3580 with four Bluetooth phones
♦
The D3580 can save the pairing information for four different Bluetooth phones,
but it can only use one cellular line at any given time. For example, if you pair the
D3580 to four Bluetooth phones, when you press cell on the handset, the D3580
asks which phone you want to connect to.
♦
If you are using the D3580 to talk on one Bluetooth phone, the D3580 will not
ring if a call comes in on another phone.
♦ You can set a different ring tone for each paired cell phone (see page 8).
♦ To pair another Bluetooth phone, just repeat the pairing procedure with the new
phone. (If the paired phones interfere when you’re pairing the new one, just turn
off Bluetooth on any paired phones until you finish pairing the new one.)
GETTING TO KNOW YOUR PHONE
Parts of the Base
Key (icon) What it does
Find Handset ( )
x In standby: page all handsets.
delete ( )
x When listening to messages: delete the current message.
x In standby: press twice to delete all messages.
UP
REV/
FLASH
DOWN
FWD/
MUTE
FIND
HANDSET
Charging
contacts
DELETE
PLAY/
STOP
ANSWER
ON/OFF
Message
counter
Bluetooth device
number
SPEAKER
USB Charging Port
(Standard size)