Uniden D3580 - Manual (Page 16)

16 - English
♦ If you need the phone to wait before sending the next set of digits, press redial/
pause to insert a 2-second pause. You can insert multiple pauses, but each one
counts as a digit (you’ll see P in the display).
♦
To edit the name, press pHonebook to move the cursor back and insert a letter.
Press intercom/clear to delete a letter.
♦
To edit the number, press intercom/clear to back up the cursor and delete
numbers. Re-enter the correct numbers.
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Select Home , then Delete All . To
confirm, select Yes .
Using an Optional Headset
You can use a standard 2.5 mm telephone headset with your cordless handsets. To
purchase headsets, contact the Parts Department
(see the front cover).
♦
To install a headset, remove the headset jack cover and
insert the headset plug into the jack.
♦
Just make and receive calls as usual, and use your headset
to talk to the caller after the call connects.
♦
When you connect a headset, the handset automatically
mutes the earpiece. To re-activate the earpiece, just unplug
the headset.
USING SPECIAL FEATURES
Silent Mode
You can silence the ringers on the base and all handsets for a specific period of time;
the answering system answers any incoming calls without playing anything through
the speaker.
1. With the phone in standby, press and hold
# on any handset. The phone prompts
you to select the number of hours ( 1 - 9 or Always On ) that you want it to stay in
silent mode.
2. To confirm, press menu/select or just wait about 5 seconds. The phone turns on
the answering system and displays Silent Mode On on each handset.
3. After the selected number of hours, the phone automatically exits silent mode. To
exit silent mode manually, press and hold # again.
#
If the phone is in silent mode and you turn off the answering system, the
phone exits silent mode.
Call Block
If you subscribe to Caller ID, you can save phone numbers to the call block list.
When a call comes in, the phone compares the received phone number to the