Uniden D3580 - Manual (Page 13)

English - 13
If... Then...
the handset is in Talk mode and
moves out of range
the outside line is put on Hold for 30
seconds and then dropped. The LCD
alternately displays Out of Range and Check
Base Power.
the handset and base are in
standby mode and the handset
does not get a signal from the base
for 5 seconds
the LCD alternately displays Out of Range
and Check Base Power.
audio deteriorates
the handset sounds an error tone. The LCD
alternately displays End of Range and Move
toward base.
you are trying to go off-hook
call data displays and then an error tone
sounds. The LCD alternately displays Out of
Range and Check Base Power.
you are trying to go on-hook
Talk mode continues for 5 seconds and
then END displays.
Using the Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider that shows the
phone number (and sometimes the caller’s name) of incoming calls; if you turned on
Text-To-Speech, it also announces the name. Contact your telephone provider for
more information.
Caller ID list Redial list
x The phone saves the information for the last 50
incoming calls (both landline and CellLink calls) to
the CID list. An asterisk ( * ) marks any calls received
since the last time you checked the record details.
x All handsets share the same CID list so only one
handset can access the list at a time.
x In standby, handsets show how many calls came in
since the last time you checked the CID list.
x Each handset remembers
the last 10 numbers you
dialed on it.
x Only one handset can access
its redial list at a time.
x The handset does not record
which line was used to call
the number.
To… Press...
open the CID list
cid , then use the up and down keys to enter the list. Up to 5
entries display at a time.
open the redial list redial/pause .
scroll through the
lists
x up to select the previous number.
x down to select the next number.
In CID list:
x rigHt to view the number selected.
x leFt to return to the previous menu.