Uniden D3580 - Manual (Page 17)

English - 17
numbers on the call block list. If the phone number is on the list, the phone replaces
the caller's name with Call Blocked and blocks the call.
#
You can reject an incoming call from CellLink directly; press delete on the
base.
The call block list holds 20 entries, and all handsets share the same list. You can
add entries by selecting Add Call Block in the CID menu that displays after you have
viewed the CID record or through the Call Blocking menu (see below). (Only one
handset can edit the call block list at a time.)
Call Blocking Menu Options
With the phone in standby, open the menu and select Call Blocking . Choose one of
these options:
Menu Option What it does
View Number See the numbers on your call block list.
Create New
Add an entry to your call block list. The phone will prompt
you to enter a name & phone number.
Private Number
Block all calls from numbers reported by CID as "Private."
(This does not count as one of the 30 entries.)
Unknown Number
Block all calls from numbers reported by CID as
"Unknown." (This does not count as one of the 30 entries.)
Call Blocking Entry Options
With the phone in standby, open the menu, select Call Blocking/View Number , and
scroll through the entries. Press menu/select to open the individual entry. Choose
one of these options:
Choose this... To...
Edit
Edit this entry. The phone will prompt you to edit the name &
phone number.
Delete Erase this entry from the list & allow calls from this number.
Multihandset Features
#
To use the features in this section, you need at least 2 handsets.
♦ Your base supports a total of 12 cordless handsets: the one that came with the
base and up to 11 accessory handsets. Your base also supports a total of 2 DRX100
range extenders, including any that came with your phone. If you have any DRX
handsets, the D3580 is limited to a total of 6 accessory handsets. If you have any
DWX (waterproof) handsets registered to the base, the D3580 is limited to a total
of 6 accessory handsets.
♦
You must register accessory handsets to the base before using them. (Handsets
that came packaged with the base are already registered.)