Uniden D3580 - Manual (Page 21)

English - 21
To... Follow these steps:
switch
between
greetings
1. Open the menu with the phone in standby. Select Answering
Setup , then Greeting Options .
2. The system plays back the current greeting. Press menu/select to
switch greetings.
delete your
greeting
Switch to your personal greeting, then press intercom/clear while
the greeting is playing.
Accessing the Answering System
When the phone’s in standby, you can access the system from any handset through
the Play Message menu on the message/mute key. The following conditions apply:
♦
Only 1 handset can access the system at a time.
♦
If you do nothing for 30 seconds, the phone returns to
standby.
♦
During remote access, the phone beeps so you know
it's waiting for the next command.
During message playback, press menu/select to open the
menu for playback control.
Play Message
Play Message replays all the messages received, starting
with the newest, unheard messages and then replaying the older messages. With the
phone in standby, press message/mute to access the Play Message selection. You can
play messages with this mode from the base or from the handset.
To... From the base From a handset
play new
messages
Press play/stop.
Press message/mute and
select Play Message .
The system announces the number of new & old messages,
then plays each new message (followed by the day and time)
in the order it was received. After the new messages play, the
system plays the old messages.
restart this
message
Wait at least 5 seconds after the message starts playing,
press rev/FlasH. press 1 (number key).
replay an earlier
message
Within 2 seconds after a message starts playing,
press rev/FlasH. select 1 (number key).
skip a message Press Fwd/mute . Select 3 (number key).
Play Message
Voicemail
Select Play Message.