UNICOM Electric 8 - Manual (Page 35)

Actions->
: Modify all items. When finished configuration, press ESC to go
back to the action menu line.
: Save all configured values.
: Exit this page and return to previous menu.
4-4-4. LACP
4-4-4-1.Aggregator Setting
1.Group: Displays the trunk group ID.
2.LACP: Press Space key to enable or disable LACP (Link Aggregation
Control Protocol) support. If enabled, the group is an LACP Static
Trunking group. If disabled, the group is a Local Static Trunking group.
3.LACP Work Port Num: The maximum number of ports that can be
aggregated at the same time. In an LACP Static Trunking group, all ports
exceeding the number of group ports are standby and able to aggregate if
the work ports fail. In a Local Static Trunking group, the number must be
the same as the group ports.
NOTE: Before setting LACP support, set the trunking group on the
Port / Trunk Configuration page.