Uniden SC200 - Manual (Page 50)

Troubleshooting
If your SC200 is not performing properly, try the
following steps.
PROBLEM SOLUTION
Scanner won’t work. 1. Check the connections at both
ends of the AC Adapter.
2. Turn on the wall switch of
your room. You could be using
an outlet controlled by the
wall switch.
3. Move the AC Adapter to
another wall outlet or replace
the battery pack.
Improper reception. 1. Check the antenna connection
or move and reposition
the antenna.
2. Move the scanner.
3. You may be in a remote area
which could require an optional
multi-band antenna.
Check with your dealer or local
electronics store.
Scan won’t stop. 1. Adjust squelch threshold-refer
to page17 setting the squelch.
2. Check the antenna connection.
3. Check to see if may of the
channels are locked out. If so,
the scanner has less chance of
finding an active channel.
4. Review each channel’s
frequency to see if it is
still stored in memory and
is correct.
5. It’s possible that none of the
programmed frequencies are
currently active.
Scan won’t start. 1. Press the key again.
2. Adjust the SQUELCH control.
3. Check to see if all channels are
locked out.
Weather Scan won’t
work.
1. Adjust squelch threshold-refer
to page 17 setting the squelch.
2. Check the antenna.
48
50
C:...UC303ZL(SC200).VP
Mon Mar 18 17:35:53 2002
Color profile: Disabled
Composite Default screen