Uniden SC200 User Manual
Page 41
Clone Mode (PC to Scanner)
Using your PC and third-party scanner programming
software you can program the frequencies from your
computer into the SC200. To place your scanner into Clone
Mode make sure your scanner is turned off.
1.
On the scanner, press and hold
while turning on
the radio.
will be displayed.
2.
On the scanner, press the
or
key
until
appears in the display.
3.
Determine the frequency data that you want to transfer
from your PC to the scanner.
4.
From your scanner programming software, running on
your PC, begins to transfer/program the frequencies into
the scanner.
Clone Mode (Scanner to Scanner)
You can clone the frequency data of one SC200 scanner to
another. After connecting the scanner using the “Scanner
to Scanner” steps (See page 38), make sure the scanners
are turned off. On each scanner, press and hold
and
turn the radio on.
1.
On each scanner, press and hold
while turning on
the radio.
Will be displayed on both scanners.
39
41
C:...UC303ZL(SC200).VP
Mon Mar 18 17:35:35 2002
Color profile: Disabled
Composite Default screen