Uniden SC200 - Manual (Page 36)

CTCSS and DCS begins flashing in display.
The scanner starts searching for an associated CTCSS
tone or CDCSS tone when it stops on a transmission. All
tones are checked if the transmission is long enough.
However, if you press
,and there is break before a
tone is identified, the tone search starts where it left off
when the transmission begins again.
3. If a CTCSS tone is found, the tone begins flashing in
the display.
4. Press to program the tone with the frequency
stored in the channel.
-- OR --
Send the frequency with its associated tone to
another channel.
For information about sending a frequency to another
channel, see Programming Channels on the page 19.
5. Restart the search and repeat Steps 3 - 4 to search for
tones associated with other frequencies in the search
range you set in Step 1.
34
36
C:...UC303ZL(SC200).VP
Mon Mar 18 17:34:57 2002
Color profile: Disabled
Composite Default screen