Uniden SC200 User Manual

Page 18

Mounting the Flexible Antenna

Place the end of the antenna onto the BNC connector on
top of the scanner and turn clockwise until tight.

Installing the Belt Clip

1. Place the Belt Clip on

the mounting area on
the back of the scanner,
making sure the holes
in the clip line up with
the threads in the back
of the scanner.

2. Insert the 2 screws into the corresponding holes

and tighten.

CAUTION: Do not tighten the screws too tight. You could
damage the case or clip.

Using the Earphone

The PHONE jack at the top of the SportCat is a standard
3.5mm stereo phone jack. You can use either the supplied
earphone, or a stereo headset of the proper impedance
(32

). The output of this jack is monaural audio, but you

will hear it in both headphones of a stereo headset.

IMPORTANT!

Be sure to use only the supplied earphone, or stereo
headset of the proper impedance (32

). Use of an

incorrect earphone or stereo headset may be potentially
hazardous to your hearing.

WARNING: To avoid discomfort or possible
hearing damage, be sure to set the Volume
Control before plugging in the earphone
or proper headphones. A sudden opening
of the Squelch may cause unexpected
loud audio.

C:...UC303ZL(SC200).VP

Mon Mar 18 17:32:37 2002

Color profile: Disabled

Composite Default screen