Uniden SC200 - Manual (Page 42)

2. Determine the scanner that has the frequency data
that you want to transfer. This one must be set up as
the “Master Unit”, and the other must be set as the
“Slave Unit”.
3. On the Scanner that is the “Slave Unit”, press the
or
key until appears in the display.
4. Press the key on both Scanners. The data
transfer is started from the Mater Unit to Slave Unit.
During the data transfer, and characters
will continue to flash.
When the data transfer is completed, displays.
If the data transfer is not successful, the following error
message will appear.
Note: KEY LOCK is released automatically when you
enter the Clone Mode.
40
42
C:...UC303ZL(SC200).VP
Mon Mar 18 17:35:45 2002
Color profile: Disabled
Composite Default screen