Uniden WDECT 2345+1 - Manual (Page 76)

Room/Baby Monitor
This feature allows you to monitor sounds in
another room. Place a handset or the base in
the room you wish to monitor; it will function as a
microphone. A second handset can be set to
function as a remote speaker, allowing you to
monitor sounds in the room.
1) Press and enter the Room Monitor
menu. appears.
2) Select the handset or the base you want to
monitor by using
3) Press . pears, and
you hear sounds in the room
where the handset or the base is installed.
4) To turn off the Room Monitor, press or
return the handset to the cradle.
Using Room/Baby Monitor
menu/del
/volume up/down.
select/
end
To Room Monitor
RoomMonitor ap
!
!
!
This feature only
works when both
handsets are
within the range of
the base.
If the party is out
of range,
appears in the
display, and the
operation will
be cancelled.
While a pair of
handsets are in
Room/Baby
Monitor mode,
they cannot be
used to make or
receive calls.
Other handsets
can still make and
receive calls.
Unavailable
DirectLink Mode
Room Monitor
Handset Setup
[75]