Uniden WDECT 2345+1 - Manual (Page 28)

Setting the Insert Zero
Setting Name Tag
This feature adds '0' or '00' to the number, when you receive Caller ID messages.
The default setting for New Zealand is On. The default setting for Australia is Off.
The Name Tag feature works with the Caller Display number from Caller ID. A
subscription to this service is required from your network provider. There is usually
a fee for this service. When the phone rings the caller display number, when
received will be compared to numbers stored in the phonebook. If there is a match
any name stored with the phonebook number will be displayed.
1) Press (or the soft key
on the base). Select the Global Setup menu,
and then the Insert 0 submenu.
2) Press to select or
(the initial setting is On).
3) Press (or the soft key on the
base). You will hear a confirmation tone.
1) Press (or the soft key
on the base). Select the Global Setup menu,
and then the Name Tag submenu.
2) Press to select or
(the initial setting is On).
3) Press (or the soft key on the
base). You will hear a confirmation tone.
menu/del MENU
OK
menu/del MENU
OK
/volume up/down
select/
/volume up/down
select/
On
Off
On
Off
[27]
Insert 0
On
Off
Name Tagging
On
Off