Getting st arted – Uniden WDECT 2345+1 User Manual

Page 19

If you have more

than one

handset, de-

handsets you

have.

If you de-register

another handset,

perform

"Replacing the

Base Setting" for

the handset after

you de-register it

(see page 28).

Changing the Digital Security Code

Installing the Beltclip

Optional Headset Installation

The digital security code is an identification code used to connect the handset and

the base unit. Normally, setting the code is not necessary. In the rare situation that

you suspect another cordless telephone is using the same security code, you can

change the code. To change the digital security code:

1. De- register the Handset (see page 28).

2. Re- register each handset by following the steps on page 17.

Insert the beltclip into the holes on each side of the

handset. Press down until it clicks.

Pull either side of the beltclip to release the tabs from the

holes.

Your phone may be used with an optional headset. To use this

feature, insert the headset plug into the headset jack. Your

phone is ready for hands- free conversations. (Headset may be

purchased visiting the web site. See page 78.)

To attach the beltclip

To remove the beltclip

GETTING

ARTED

[18]