Uniden WDECT 2345+1 - Manual (Page 37)

BASICS
Mute Microphone
Tone Dialing Switch-over
You can temporarily mute the microphone so that the caller cannot hear you.
1) Press (or the soft key on the base) during talk mode
(while the phone is in use).
2) Press to move the pointer to and then
(or the soft key on the base). appears in the display.
To cancel muting, repeat above step again when Mute is set to on,
appears.
If your telephone company requires pulse dialing,
you can switchover to tone dialing after the call
connects. This feature is useful when you need
tone dialing to use any automated menu
systems, such as telephone bank tellers,
telephone prescription refills, customer support
menus, etc.
If your phone is set to pulse dialing mode, make
your call normally. Once your call connects, press
the key. Any digits you enter from
then on will be sent as tone digits.
When this particular call ends, the phone
automatically returns to pulse dialing mode.
menu/del MENU
OK
(Australia only)
/volume up/down select/
/tone/
Mute
Mute On
Mute Off
!
The tone feature
only applies
when the dial
mode is set to
pulse.
[36]