Toshiba Pocket PC e310 User Manual
Page 8
Introduction
User's Manual
viii
TOSHIBA Pocket PC e310
Version
1
Last Saved on 15/03/2002 14:34
ENGLISH using Euro_C.dot Printed on 15/03/2002 as PDA2_UK
■
Do not allow the Pocket PC to be subjected to sharp temperature
changes.
The resulting moisture condensation can cause failure, malfunction, or
loss of stored data.
If moisture condensation is generated, use the Pocket PC only after
allowing it to dry completely.
■
When charging the battery, the case of the AC adaptor can become
warm, but this is not abnormal.
■
Disconnect the power plug from the outlet when not in use.
■
Avoid inadvertently sitting while the Pocket PC is inserted in the back
pocket of trousers, etc.
Sitting under these circumstances can cause damage or failure.
■
Do not place objects or drop them on top of the Pocket PC.
When the pocket PC is placed in a bag containing heavy items, do not
allow it to be caught underneath them.
Placing it under these conditions can cause damage or failure.
■
Clean the terminals (metallic parts) occasionally with a Q-tip.
Dirty terminals can cause disconnection or poor charging.
■
Do not use organic solvents such as benzene or thinner to clean the
Pocket PC.
Use of these solvents can cause deformation or discoloration.
Wipe dirty parts with a soft dry cloth.
■
Do not wipe the display with a wet cloth. Do not touch it with wet
hands.
Wiping or touching under these conditions can cause failure or
malfunction.
Wipe the display with a soft dry cloth.
■
It is recommended that important data stored in the unit should be
either noted down occasionally, or saved to a memory card (sold
separately) or personal computer (data transfer with Active Sync).
The following can result in loss of stored data.
■
Misuse of the Pocket PC
■
Subjecting the main unit to the effects of static electricity or
electric noise
■
Total loss of charge in the built-in battery due to an extended
period of non-use
■
Failure or repair servicing of the Pocket PC
■
Toshiba Corporation is in no way liable for change or loss of stored
data resulting from failure or repair of the unit. Please understand this
before usage.