Uniden UH013 - Manual (Page 14)

13
Turn the Rotary Channel Selector to the desired
channel to use CTCSS. Press and hold
for 2 seconds. CTCSS icon flashes.
Turn the Rotary Channel Selector to select the
desired CTCSS code 01 - 38. Press
once to store the new setting.
Rotary
Channel
Selector
Channels 05 and 35 are Emergency Channels
and channel 11 is a Calling Channel.
CTCSS cannot be selected on these channels.
NOTE
If a button is not pressed within 10
seconds the UH013 will automatically
exit Select Mode.
NOTE
SLCT
STORE
INST
CTCSS SET/SKIP
SCAN MEM SRCH
DUP OS/GS TSQ
CTCSS
SQT
MHz
SQT
SQT
Wide Band Scanning
The UH013 can also scan a wider band of frequencies (Step: 12.5 KHz).
Band Frequencies
A 400 MHz - 420 MHz
B 420 MHz - 450 MHz
C 450 MHz - 470 MHz
D 470 MHz - 512 MHz
Transmission is not possible on wide band
frequencies.
NOTE
Rotary
Channel
Selector
STORE
INST SQT
CTCSS SET/SKIP
SCAN MEM SRCH
DUP OS/GS TSQ
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
SLCT
1. Press once.
2. Turn the Channel Selector to select .
3. Press and hold for 2 seconds to
store the new setting.
Searching of band A will immediately begin.
WS
SLCT
SLCT
C T C S S (Continuous Tone Coded Squelch System)
UNIDEN Model UH013 UHF CB Radio
Operation