Specifications, Answering system troubleshooting chart – Uniden XCA750 User Manual
Page 41
![background image](/manuals/216865/41/background.png)
Answering System Troubleshooting Chart
Specifications
Problem
Suggestion
Answering System does not work.
l
sure that the Base Unit is plugged
l
Make sure the Answering System is
turned on.
Answering System does not answer calls.
Messages are incomplete.
After a power failure, the outgoing message
is deleted.
Message Counter LED flashes the letter P.
No sound on the Base Units eaker during
call monitoring or message p ayback
Cannot access remote call-in features from
another touch-tone phone.
Cannot record outgoing message (ogm).
Clock losses time.
75
76
l
Press the RESET button to reset the
system after an AC line spike.
l
Set the REC TIME/ANN/4/1 switch in
either the 4-mintue or 1 -minute position.
l
The memorv mav be full. Delete some
or
all of the saved messages.
l
The incoming messages may be too long.
Remind callers to leave a brief message.
l
The memory may be full. Delete some or
all of the saved messages.
l
The answering machine has a flash
memory with no battery backup. Record
our personal outgoing message again.
he default messages should still remain.
l
There has been a power failure. Press
RESET to reset the Answering System.
l
Adjust the volume control on the side of
the Base Unit.
l
you’re using the correct PIN
l
Make sure that the touch-tone phone
using can transmit the tone for at
east two seconds. If it cannot. vou mav
have to change to another phone.
l
The memory may be full.
Delete some or all of the saved
l
The power to the base unit has been
interrupted.
Reset the clock as detailed on page 41
of this owner’s manual.
General
Frequency Control
Phase Locked Lcop (PLL) Synthesizer
Modulation
FM
Operating Temperature
-10˚ to 50˚C
Base Unit
Receive Frequency
Transmit Frequency
Power Source
Size
Weight
39.775-40.000 MHz (10 Channels)
30.075-30.300 MHz (10 Channels)
AAD-650U AC Adapter (N14700)
Output: 9V, 350mA DC
Input: 230-240V AC, 50Hz
213 (W) x 140 (D) x 48 (H) mm
Approx. 667 gm
Handset
Receive Frequency
Transmit Frequency
Power Requirements
Size
Weight
Battery
Answering System
memory Type
memory Capacity
Message Length
30.075-30.300 MHz (10 Channels)
39.775-40.000 MHz (10 Channels)
Rechargeable Ni-Cd Battery Pack
56 (W) x 68 (D) x 307 (H) mm
(w/ antenna)
Approx. 353 gm (including battery)
BT-l 61
Capacity
270 mAh, 3.6V
Talk Mode
6 hours
Standby Mode
14 days
Digital Tapeless Recording
20 min. (nominal) (40 messages)
1 min. or 4 min. Incoming Message
(max.)
1 min. outgoing message (max.)
Specifications, Features, and availability of Optional Accessories are all
subject to change without prior notice.