Uniden XCA750 - Manual (Page 39)

2. Press
3. Press your four-digit code.
4. Press again.
You will hear a long tone
which indicates that the new
code is saved,
5. Press again to return
to Standby.
Using a Touch-Tone Phone
You can operate your Answering System using any touch-tone telephone.
Use this function to check for recorded messages, play or delete messages,
or even record a new outgoing message.
1. Call your telephone number.
2. During the outgoing
message playback, press ##
followed by your PIN number.
- -
3. The Answering System
announces the Time and
Day Stamp. And the number
of messages stored in
memory follows.
4. You then hear intermittent
beeps indicating that the
system is in the Command
Waiting Mode.
You must enter a
command within 20 seconds
or the Answering System
hangs up and returns to
Standby.
71 72