Uniden XCA750 - Manual (Page 21)

4. Press tone on the Handset.
button)
5. Enter the number to be dialed
in tone mode.
6. If a pause is needed during
dialing to access a long
distance service, press
.
Note: The button counts as one digit and lasts three seconds.
Pressing more than once increases the length of the pause
between numbers.
7. Press again.
6. Enter the memory location
A tone indicates that the
number is stored.
.
Dialing a Stored Number
To dial a number previously stored in memory, follow these steps:
1. Remove the Handset from
the Base Unit.
2. Press .
3. Press
36