Uniden DSS7955+1 - Manual (Page 63)

62
Remotely.Operating.Your.Answering.Machine
You can access your answering machine while you are away from home to check, play, delete messages, or even
record a new greeting message or to turn your answering machine on and off.
Note:
The answering machine will only playback messages for four minutes and then it returns to the command-
waiting mode. To continue playing your messages, press [#] then [2] again within 5 seconds.
If you enter an incorrect security code three times, you will hear a beep and the answering machine will return
to standby.
To operate from a remote location, use any touch-tone telephone and follow these steps:
Call your telephone number and wait for the answering machine to answer. If the answering machine is off,
it will answer after about 5 rings and series of beeping sounds.
During the greeting message (or a series of beeps when the answering machine is off), press
[#] and enter your
PIN code within 2 seconds (see "Setting a Security Code or Personal Identification Number (PIN)" on page 55).
The answering machine announces the current time and the number of messages stored in memory.
You hear "To play incoming messages, press pound-two. For help, press pound-zero." You will hear a beep.
Enter a remote command within 5 seconds, each command there after must be entered within 2 seconds. You
may select a command from the following chart:
•
•
)
2)
3)
4)