Uniden DSS7955+1 - Manual (Page 44)

43
Transferring.a.Call
You can transfer a call from one station to another.
During a call, press [int’com/hold].
Use [ ] or [ ] to select the station you want to transfer the call to, then press the
OK soft key.
The call will automatically be placed on hold, and a paging tone sounds. To cancel
the transfer, press [ /flash] or [ ].on the initiating handset or [ ].on the base.
When another station accepts the transferred call, your call will be disconnected.
If you want to rejoin the call, press [ /flash] or [ ] on the handset or [ ] on the base.
Answering.a.Transferred.Call.
When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging.
To accept the call transfer:
Press [ /flash], [int’com/hold], or the ANSWER soft key from the handset (or [int’com/hold], [ ] or the
ANSWER soft key on the base).
To speak to the caller, press
[ /flash] on the receiving handset or [ ] on the base.
If you have multiple handsets, only the first handset to answer the transfer page will be connected to the call.
If the transfer page is not picked up within one minute, the operation will be canceled.
)
2)
3)
)
2)
*QNFVQVTCPUHGT
*CPFUGV
*CPFUGV
$#%- &'.'6' 1-
*QNFVQVTCPUHGT
*CPFUGV
*CPFUGV
$#%- &'.'6' 1-