Uniden DSS7955+1 - Manual (Page 38)

37
Using.Caller.ID,.Call.Waiting.and.Redial.Lists
If you subscribe to Caller ID from your phone company, your phone will show you the caller’s phone number and
name (if available) whenever a call comes in. If you subscribe to both Call Waiting and Caller ID, the phone also
shows you the name and the number of any call that comes in while you are on the line.
Note:
If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller
ID message may not appear.
When the call is received via a Telephone Company that does not offer Caller ID service, the caller’s phone
number and name will not appear. (This includes some international calls.)
When the Call is from a PBX (private branch exchange), the caller’s phone number and name may not appear.
Using.the.Caller.ID.List.
You can store up to 00 Caller ID numbers in each station. Your phone shares up to 00 memory entries between
your Phonebook and Caller ID. When the shared memory is full and when you store a new phonebook entry,
the oldest Caller ID message is overwritten. Once you reach your maximum phonebook entries of 00, Caller ID
information will not be stored (but it will still display when the call comes in).
To open the Caller ID list, press
[ ] (on the right side of the four-way key). The phone will show the total number of
stored Caller ID records. Use [ ] or [ ] to scroll through the list, or enter a letter on the keypad to jump to the first
caller ID name that starts with that letter. To scroll quickly through the list, press and hold [ ] or [ ] on the four-way
function key.
Note: The number of calls from the same Caller ID will appear next to the time to indicate that this is an unread
message. Once you view the new message, the number will disappear.
•
•
•