Toshiba MW26H82 User Manual
Page 81
81
Others
SYMPTOMS
VCR
TV recording does not work.
Timer recording does not
work.
Noise bars appear on the
screen.
DVD
The playback picture has
occasional distortion.
The unit does not start
playback.
Playback does not follow the
course of the disc’s program.
“ ” appears on the screen.
REMOTE CONTROL
Remote control does not
operate.
CAUSE
The video cassette's erase prevention tab
is broken off.
The time is not set correctly.
The recording start/end time is not set
correctly.
The TIMER REC button is not pressed (the
TIMER REC indicator is not lit).
Tape is old or worn.
Tracking adjustment is beyond range of
automatic tracking circuit.
Video heads are dirty.
The disc is dirty.
It is in fast forward or fast reverse playback.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The parental lock function is set.
It is in the mode of repeat playback,
memory playback, etc.
The function is prohibited with the unit or
the disc.
The remote control is not aimed at the
sensor.
Distance is too far or too much light in the
room.
There is an obstacle in the path of the
beam.
The batteries are weak.
The batteries are not inserted correctly.
POSSIBLE SOLUTIONS
Place a piece of adhesive tape over the
hole.
Reset the present time.
Reset the start/end time.
Press TIMER REC (the TIMER REC
indicator is lit).
Replace the tape.
Adjust tracking manually using TRK +/–
on the remote control.
Clean the video heads.
Eject the disc and clean it.
Some times a small amount of picture
distortion may appear. This is not a
malfunction.
Insert a disc.
Insert a playable disc (Check the disc
type and color system).
Place the disc with the playback side
down.
Place the disc correctly inside the guide
on the disc tray.
Cancel the parental lock function or
change the parental lock level.
These operations may prevent a
proper progress of the contents.
–
Aim the remote control at the remote
sensor.
Operate within 5 m or reduce the light
of the room.
Clear the path of the beam.
Replace the batteries.
Insert correctly.
PAGE
46
23
53
53
–
48
50
8
–
47
9
47
47
76, 77
–
9
12
12
12
12
12
5V90101A [E]p78-82
8/4/06, 5:49 PM
81