Tv operation – Toshiba MW26H82 User Manual

Page 25

TV operation

Adjust the volume level by pressing VOL

–

The volume level will be indicated
on the screen by green bars. As the
volume level increases, so do the
number of bars. If the volume
decreases, the number of green
bars also decreases.

Set the TV/CABLE selection to the appropriate
position

Press Direct channel selection buttons (0–9)
or CH

to select the channel.

Notes:
• If a channel with no broadcast is selected, the sound will auto-

matically be muted.

• If a station being viewed stops broadcasting, the TV will auto-

matically shut itself off after 15 minutes.

• Digital cable channels may be represented by channel

numbers that include a “dash” (e.g., 85–002). These digital
channel numbers may not match the numbers in the
channel line-up provided by your cable company. This is not
a malfunction.

To turn on the unit, press POWER.

The Power indicator will light.

• Every time you turn on the TV, the

unit starts from TV mode. When
you use TV after DVD operation,
press TV/VCR.

- VHF/UHF channels

CABLE - Cable TV channels

TO SELECT ANALOG CHANNELS
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9:

Press 0 twice, then 1-9 as needed.
Example, to select channel 2, press 0 0 2.

10-99:

Press 0, then the remaining 2 digits.
Example, to select channel 12, press 0 1
2.

100-125: Press the 3 digits in order. Example, to

select channel 120, press 1 2 0.

TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the “–/DISPLAY”
button, followed by the remaining 3 digits.
Example, to select channel 015-001, press 0 1 5 –
0 0 1.

Cable TV

VHF
2-13

STD/HRC/IRC

14-36

(A) (W)

37-59

(AA) (WW)

60-85

(AAA) (ZZZ)

86-94

(86) (94)

95-99

(A-5) (A-1)

100-125

(100) (125)

(5A)

VHF
2-13
UHF

14-69

TV operation

TV/VCR

VOL +/–

POWER
0–9/–

V O L U M E

3 2

ANT TV

5V90101A [E]p24-31

8/4/06, 5:44 PM