Toshiba 62MX195 - Manual (Page 94)

94 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 56/62/72MX195
Chapter 8: Using the TV’s features
Using the PC setting feature
You can adjust the horizontal position/size, vertical position/size,
clock phase, and sampling clock. This feature will be grayed out
on the menu unless there is a PC connected to the TV (See
“Connecting a personal computer (PC)” on page 29.)
To set the PC setting:
1. Confirm a PC is connected (see “Connecting a personal
computer (PC)” on page 29).
2. Repeatedly press INPUT to select PC input mode. (See
Selecting the video input source to view ” on page 72.)
3. Press MENU and open the Setup menu.
4. Highlight PC Settings and press ENTER.
Navigate Select Back Exit CH RTN EXIT
Installation
Sleep Timer
On/Off Timer
Setup
PC Settings
HDMI 1 Audio Auto
Auto
2 Sec
HDMI 2 Audio
Slide Show Interval
5. Press y or z to highlight the item you want to adjust.
6. Press x or • to make the appropriate adjustments.
Done
PC Settings
Horizontal Width 0
Vertical Position
Reset
Horizontal Position 0
0
0
0
0
Vertical Height
Clock Phase
Sampling Clock
• Horizontal Position/Vertical Position:
Adjusts picture left/right and up/down. The adjustment range
is within ±5 from center.
(The adjustable range may vary depending on the input mode.)
• Horizontal Width/Vertical Hegiht:
Adjusts picture width of Horizontal and picture height of Vertical.
The adjustment range is within ±5 from center.
• Clock Phase:
This function is to reduce noise and sharpen the picture.
The adjustment range is within ±15 from center.
• Sampling Clock:
This function is to minimize periodic vertical stripes on the
screen.
The adjustment range is within ±15 from center.