Toshiba 62MX195 - Manual (Page 91)

91
Chapter 8: Using the TV’s features
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 56/62/72MX195
Adjusting the audio
(continued)
Using the SRS WOW™ surround sound
feature
WOW ™ is a special combination of SRS Labs audio
technologies (SRS 3D, FOCUS, and TruBass) that creates a
thrilling surround sound experience with deep, rich bass from
stereo sound sources. Your TV’s audio will sound fuller, richer,
and wider.
To adjust the WOW ™ settings:
1. Put the TV in STEREO mode (see “Selecting stereo/SAP
broadcasts” on page 89).
2. Press MENU and open the Audio menu.
3. Highlight Advanced Audio Settings and press ENTER.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
4. Press z or y to highlight the WOW feature you want to
adjust, and then press x or • to adjust the item.
Done
Advanced Audio Settings
WOW: SRS 3D
WOW: FOCUS
WOW: TruBass Low
Reset
Off
Off
Dolby Virtual
TruSurround
On
• WOW: SRS 3D — To turn the surround sound effect On
or Off.
Note: If the broadcast is monaural, the 3D effect does not
work.
• WOW: Focus — To turn the vocal emphasis effect On or
Off.
• WOW: TruBass — To select the desired bass expansion
level (High, Low, or Off ).
5. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
_______________
WOW, TruSurround, SRS and
symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
Using the Dolby Virtual with SRS
TruSurround sound feature
The Dolby Virtual surround sound feature allows you to enjoy
virtual surround sound from the TV’s speakers. The Dolby
Virtual TruSurround feature is enabled only when receiving
digital broadcasts.
To turn on the Dolby Virtual surround sound feature:
1. Press MENU and open the Audio menu.
2. Highlight Advanced Audio Settings and press ENTER.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
3. In the Dolby Virtual TruSurround field, select On.
Done
Advanced Audio Settings
WOW: SRS 3D
WOW: FOCUS
WOW: TruBass Low
Reset
Off
Off
Dolby Virtual
TruSurround
On
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To turn off the Dolby Virtual surround sound feature:
Select Off in step 3 above.
Note: The Dolby Virtual TruSurround and WOW SRS 3D
features cannot be on at the same time. If you set one to
On, the other will automatically be set to Off.