Toshiba HWS-802XWHT6-E User Manual
Page 138

137
Toshiba
2
Outlet cabinet
How to remove
1) Perform the step 1-1.
2) Remove the screws of the outlet cabinet and
parting board.
(ST1T Ш4 Ч 8, 3 screws)
3) Remove the screws of the outlet cabinet and
bottom board.
(Hex Ш4 Ч 10, 2 screws)
4) Remove the screws of the outlet cabinet and
motor base.
(ST1T Ш4 Ч 8, 2 screws)
5) Remove the screws of the outlet cabinet and water
heat exchanger.
(ST1T Ш4 Ч 8, 1 screw)
6) Remove the screws of the outlet cabinet and fin
guard.
(Hex Ш4 Ч 10, 2 screws)
3
Side cabinet
1) Perform the step 1-1.
2) Remove the screws that fixes the inverter
assembly and the side cabinet.
(ST1T Ш4 Ч 8, 2 screws)
3) Remove the screws of the side cabinet and valve
fixing board.
(ST1T Ш4 Ч 8, 2 screws)
4) Remove the screws of the side cabinet and piping
panel (back).
(Hex Ш4 Ч 10, 2 screws)
5) Remove the screws of the side cabinet and bottom
board.
(Hex Ш4 Ч 10, 1 screw)
6) Remove the screws of the side cabinet and water
heat exchanger.
(Hex Ш4 Ч 10, 3 screws)
7) Remove the side cabinet while shifting it upward.
(Inverter hook)
No.
Exchange parts
name
Work procedure
Remarks
Outlet cabinet
Water heat exchanger
Motor base
Paring board
Fin guard
Inverter assembly
Side cabinet
Piping panel (back)
Valve fixing board
+00A09-002_01EN_SVM_ALL_Air_to_Water.book Page 137 Monday, October 5, 2009 2:09 PM