Toshiba FIERY GA-1121 - Manual (Page 76)

3
3-14 Using Command WorkStation or Command WorkStation LE
The following table describes job management commands in greater detail and
explains how each command affects the raster data associated with a job:
Viewing and overriding print settings
When logged in as Operator, you can view, override the user print settings, and print
any held job in the Active Jobs window and the Printed Jobs panel. You can view and
override print settings of jobs in the FreeForm panel. You can view print settings, and
print jobs in the Archive panel.
Use the Job Properties dialog box to view the user Notes and Instructions fields
included with jobs.
Choose this command To do this Raster data is
Print Prints the selected job in the Active Jobs
window, Printed Jobs panel, FreeForm
panel, or Archive panel. Temporarily held on the GA-1121 until the
job completes printing.
Hold Holds the selected job waiting to process in
the Active Jobs window, or the selected job
in the Printed Jobs or Archive panel, and
marks the job with either the spooled/held
flag or the processed/held flag. Held on the GA-1121 hard disk drive
indefinitely, if raster data is included with
job.
Process and Hold Processes the selected job in the Active Jobs
window, Printed Jobs panel, or Archive
panel, and holds a copy of the job. The
copied job is marked with the processed/
held flag. Held on the GA-1121 hard disk drive
indefinitely.
Print and Hold Prints the selected job in the Active Jobs
window, Printed Jobs panel, or Archive
panel, and holds a copy of the job. The
copied job is marked with the processed/
held flag. Held on the GA-1121 hard disk drive
indefinitely.
Remove Raster Data Removes the raster data associated with the
selected processed/held job in the Active
Jobs window, or with the selected raster job
in the Printed Jobs or Archive panel; leaves
the original PostScript or PCL data in place. Deleted.