Toshiba FIERY GA-1121 - Manual (Page 159)

7
7-9 Job icons
RIP area
The job icons in the RIP area are as follows:
After a job is rasterized, it goes into the RIP area. The RIP area holds only jobs with
raster data. Jobs in the RIP area are either waiting for the copier/printer to be free
(Print queue jobs, Icon 2), or they are being held (Icon 1). Held jobs in the RIP area
have already been rasterized (RIP and Hold), or they have been printed and their raster
data has been routed back to the RIP area
( Print and Hold).
N OTE : Raster jobs in the RIP area that are waiting to print (Icon 2) cannot be
manipulated by job commands.
Print area
The job icon in the Print area is as follows:
The Print area, also referred to as the Printed queue, contains jobs that have already
been printed. These jobs were assigned the Print destination (white printer icon in the
Spool or RIP areas) without any Hold instructions; therefore, they all have white icons.
N OTE : A job row that appears in light red indicates that an error occurred while
printing the job. To see the error, double-click anywhere in the row.
RIP area icon What it indicates How long you see the job
1 Raster data, no destination
defined; may have been
printed before and held Until it is deleted, moved to
the Archive window, or
stripped of its raster data and
sent to the Spool area
2 Raster data headed for Print
in its turn; no hold defined Until copier/printer is free to
print the job
Print area icon What it indicates How long you see the job
1 PostScript or PCL data
only—raster data has been
deleted Until the job limit is reached