Toshiba TDP-TW100 - Manual (Page 19)

37
Operations
36
Item Description Computer Y/P B /P R Video S-video
Wireless/
USB
Position Frequency Yes No No No No
Adjust to eliminate periodic patterns and
flickering when many fine vertical lines
appear on the screen.
H-position Yes No No No No
Adjust the horizontal position of the image.
V-position Yes No No No No
Adjust the vertical position of the image.
Clamp 1 Yes No No No No
Adjusts the clamp pulse position.
Clamp 2 Yes No No No No
Adjusts the clamp pulse width.
*1: [Noise reduction] may not work depending on signal type.
*2: [[NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or
[NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for
other languages.
Using the menus (Continued)
■
The image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked,
it indicates that you cannot select for the current input.)
Item Description Computer Y/P B /P R Video S-video
Wireless/
USB
Contrast Adjust the image contrast. Yes Yes Yes Yes Yes
Lower Higher
Brightness Adjust the brightness of the image. Yes Yes Yes Yes Yes
Darker Brighter
Color Adjust the color of the image. No Yes Yes Yes No
Lighter Deeper
Sharpness Adjust the sharpness of the image. No Yes Yes Yes No
Softer Sharper
Noise Set the function to reduce screen noise. No Yes Yes Yes No
reduction *1 On (Enable) Off (Disable)
Picture mode Press . Toggle the picture mode with No Yes Yes Yes No
.
1/2/3
1/2/3/4/5 Yes No No No Yes
/
/
R-level Adjust red of the image color. Yes Yes Yes Yes Yes
Less red More red
G-level Adjust green of the image color. Yes Yes Yes Yes Yes
Less green More green
B-level Adjust blue of the image color. Yes Yes Yes Yes Yes
Less blue More blue
NTSC mode *2 Set the black level with . No No Yes Yes No
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
Auto setting Automatically adjusts items such as the Yes No No No No
samplingphase depending on the type of
input signal.
Position Press then change mode using Yes No No No No
and adjust with .
Phase Yes No No No No
Adjust to eliminate flicker.