Resizing image, Changing picture mode, P.31 – Toshiba TDP-TW100 User Manual
Page 16: P.30, Operations, Using handy features (continued)
31
Operations
30
Remote
Control
3
To move the area to zoom in, use the
buttons.
You can keep pressing.
4
To reset the zoom, press the RETURN button.
The image is reset to the original size.
Notes
• The
icon appears while resizing.
• Operating a function other than Mute will release resizing.
• As zooming is processed digitally, the image quality is degraded in larger zoom
ratio.
• During resizing or moving the zooming area, the image may be distorted.
■
Cutting off the picture and sound temporarily (Mute)
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector’s images and sound can be
turned off.
Press the remote control’s MUTE button.
The picture and sound are cut off. (The Mute function is released
when pressing the MUTE button again.)
Notes
• The
icon will appear while mute is in effect.
• Operating any other functions will also cancel the muting.
■
Changing picture mode
The projected image mode can be selected.
Press the remote control’s PICTURE button.
1
The Picture mode menu appears.
When connected with computer or USB device 1/2/3/4/5
When connected with video equipment 1/2/3
2
Select a mode using
then press
.
Though the
button is not pressed, the picture mode
changes as the setting is changed and the display turns off
automatically in a few seconds.
Note
• [Picture mode] of the Image adjustment menu has the same
function
.
Remote
Control
Using handy features (Continued)
Adjusting Keystone distortion [Auto]
2
Press the
button.
The keystone distortion is automatically corrected. The
icon appears during this
correction.
When adjustment is finished, the Keystone menu appears again. For fine adjust-
ment, select [V-keystone] by the
button and adjust image manually by the
buttons.
Adjusting Keystone distortion [Manual]
1
Press the KEYSTONE button.
2
Select [V-keystone] by the
button.
3
Use the
buttons for keystone adjustment.
Notes
• A message appears on the screen if the automatic vertical keystone distortion
correction fails.
• Depending on the amount of keystone adjustment and the content of images, some
information may be lost, or the picture quality may suffer.
Precaution
• Depending on the room temperature and brightness, the placement as well as the
projecting surface condition and material, the correction may not be properly made.
When such a case arises, make correction manually.
■
Resizing image
The projected image can be resized (zoomed in/out).
1
Press the remote control’s RESIZE
button.
Each time you press the RESIZE
button, zoom ratio is up. You can keep
pressing.
2
To zoom out, press the remote control’s RESIZE
button.
Each time you press the RESIZE
button, zoom ratio is
down. You can keep pressing.
(However, the image cannot be smaller than the original
size.)
Remote
Control