Toro TMC-424E User Manual

Page 9

To Set Interval Days:

1. Set the Program Switch to select

program A, B, C, or D.

2. Turn the Function Dial to the Interval

Days

position.

3. The

CYCLE LENGTH

prompt and the

current Interval (01–31DAY or -- -- -- [Off])

will be displayed.

4. Press the

button to select the

Interval cycle length.
NOTE: The cycle length can be set from

01 (water every day) to 31 (water once

every 31 days). The Interval cycle starts

at 01 and increases by 1 digit each day.

The watering day occurs when the

selected Interval cycle length is reached.

To specify when the first watering day

will occur, the current day within the

Interval cycle must be selected.

For example, if a 04 DAY Interval is

entered and watering is to begin in one

day, select 03 as the Current Day.

5. To select the Current Day in the Interval

cycle, press the

button to display the

CURRENT DAY

prompt.

6. Press the

button to select the

value (01–selected Interval number).

7. To exclude specific days from watering

(7 maximum), press the

button to

select the day.

8. To exclude the day from the schedule,

press the

button to display the

Watering Off

icon.

9. Repeat steps 7 and 8 to continue

excluding days.