Texas Memory Systems RamSan-325/325c - Manual (Page 27)

RamSan-325/325c User’s Manual - 23 -
Via Text Management
• From the Telnet Main Menu, select “Management setup”
• Select “Enable/Disable Telnet.” If Telnet is enabled, your
option will be “Disable Telnet” and visa versa.
• Press the “ ” key or [ENTER] to toggle between the sections
• Select “Save changes and exit” to save the changes.
The menu displays the current Telnet status above the menu
options, as shown in Figure 4-4: Telnet Setup. Users currently
connected through Telnet remain connected until their session
ends.
Figure 4-4: Telnet Setup