Tyan Computer Barebone System B4881V50S4H - Manual (Page 10)

1.2 Features
2 Chapter 1: Overview
1.2 Features
Enclosure
• Industry standard pedestal or 19-inch
rack mountable, 5U chassis
• (4) hot swap SATA HDD bays
• (4) internal HDD bays (upgradable to
hot swap bays)
• (1) slim CD-ROM drive bay
• (1) standard FDD bay
• (3) 3.5-inch device bays
• Dimensions:
- 26.8 x 16.7 x 8.7-inch (5U)
- 680 x 425 x 220 mm
Storage Controller
• (2) dual port SATA II controllers
integrated in NVIDIA nForce4 Pro chip
• Support for up to four SATA HDDs
• Supports 3 Gb/s per port, 1.5 Gb/s in
each direction per channel
• Support for RAID 0, 1, 0+1, and
NVIDIA Morphing RAID
Motherboard
• Tyan Thunder K8QW Pro S4881
• SSI EEB 3.5 footprint (13 x 16-inch)
Processors
• Support for up to eight AMD®
Opteron™ 800 series processors.
CPU board (8 processor only)
• Tyan M4881
• 13 x 12-inch
Chipset
• NVIDIA nForce4 Professional +
AMD-8131 HyperTransport PCI-X
tunnel
• Winbond W83627HF Super I/O chip
• ADT7468 hardware monitor IC
BIOS
• Phoenix 8Mbit LPC Flash ROM
• Serial Console Redirect
• USB device boot
• ACPI 2.0 power management support
Memory
• (16) 184-pin 2.5V DDR DIMM
sockets on S4881 motherboard
• (16) 184-pin 2.5V DDR DIMM
sockets on M4881 CPU board
• Up to 128 GB of registered, ECC
DDR400/333/266 memory
Networking
• (2) Gbit Ethernet ports (Broadcom
®
BCM5704 dual port controller)
Video
• ATI
®
Rage™ XL PCI Graphics
controller
• 8 MB Frame Buffer video memory
Expansion slots
• (2) 16 PCI Express slots (one with x4
signal)
• (2) Independent 64-bit PCI-X bus
• (1) 64-bit 133 MHz (3.3V) PCI-X slot
• (2) 64-bit 100 MHz (3.3V) PCI-X slot
Server Management
• Automatic fan speed control
• Chassis intrusion alert
• Tyan Server Management Support
• Tyan SMDC, IMPI v 1.5 compliant
remote server management kit (option)
Back I/O ports
• PS/2 mouse and keyboard ports
• (2) RJ-45 10/100/100BaseT with
activity LED
• (2) USB 2.0 ports
• (1) 9-pin UART serial port
• (1) 15-pin VGA port
Front panel
• (2) USB 2.0 ports
• LED indicators (power, LAN x2, HDD
activity, ID)
• Switches (power, reset, ID)
Power supply
• (4) redundant power supply modules, 4
x 500 watt.
Regulatory
• FCC Class A (declaration of
conformity)
• CE (declaration of conformity)