Index, Docking station – Technicolor - Thomson VMD 22 User Manual
Page 86
EN
85
INDEX
Docking Station
1
PC Connector [DIGITAL STILL] ............
੬
pg. 58
2
J Terminal/Edit Connector
[JLIP (Joint Level Interface Protocol)
(EDIT)] ................................................
੬
pg. 71
•Connect to a JLIP-compatible camcorder or
VCR to control it from the computer using the
provided Software.
NOTE:
Make sure that the camcorder is turned on while
connecting the camcorder to a PC using the
Docking Station’s JLIP connector. If the camcorder
is turned off (because the POWER Switch is set to
“OFF” or due to Auto Shut Off* etc.) while the
JLIP programme software is used, it will be
impossible to control the connected devices from
the computer. In such a case, first try turning the
camcorder on again, or unplug the JLIP connec-
tion cable from the Docking Station’s JLIP
connector. Then, initialise or run the software
again.
* Auto Shut Off:
If 5 minutes elapse in the Record-Standby mode
or in the Pause mode, the camcorder’s power
shuts off automatically to conserve energy.
•Connect the editing cable when performing
Random Assemble Editing .........
੬
pg. 70 – 75
5
6
7
1
4
!
2
8
9
0
3
Not applicable
4
External Stereo Microphone Input
Connector [MIC] .................................
੬
pg. 76
5
Stud ....................................................
੬
pg. 56
6
Screw ..................................................
੬
pg. 56
7
Multi Connector
The Docking Station can be connected with this
camcorder through this connector. Never touch it
with your hand or hit it with a hard object; if the
pins are damaged, the connectors will become
unusable due to contact failure.
8
S-Video Input/Output Connector
[S] .................................................
੬
pg. 56, 71
9
Video Input/Output Connector
[VIDEO] ........................................
੬
pg. 56, 71
0
Audio Input/Output Connectors
[AUDIO L/R] .................................
੬
pg. 56, 71
!
Screw Knob .........................................
੬
pg. 56
To attach the camcorder, tighten this clockwise.
VMD22 EN(66/100)
29/08/00, 15:47
85