Technicolor - Thomson VMD 22 - Manual (Page 30)

E N
2 9
NOTES:
● The “MANUAL MENU” settings are effective only when the Operation Switch is set to “ ”.
● “DISPLAY MENU” functions which are set when the POWER Switch is set to “ ” are also applied
when the POWER Switch is set to “ ” (
੬
pg. 41). “CLOCK ADJ.” only appears when the POWER
Switch is set to “ ”.
● The “DISPLAY MENU” settings are effective even when the Operation Switch is set to “ ”.
● The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) (
੬
pg. 57, 60, 71).
: Factory-preset
DISPLA
Y
MENU
FLASH
FLASH
ADJ.
ON
SCREEN
DATE/
TIME
TIME
CODE
CLOCK
ADJ.
WIND
CUT Disengages the function which cuts down on noise created by wind.
Helps cut down on noise created by wind. “ ” appears. The quality of the
sound will change. This is normal.
Refer to “Snapshot Flash” (
੬
pg. 30).
Refer to “Flash Brightness Adjustment” (
੬
pg. 31).
Keeps the camcorder’s display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder’s display appear on screen when the camcorder is
connected to a TV.
Keeps the indications (except the tape running indicator, warnings, date, time,
time code, etc.) from appearing in the camcorder. Also keeps the camcorder’s
display (except the date, time and time code) from appearing on the
connected TV screen.
Displays the date/time for approx. 5 seconds in the following cases:
•When the POWER Switch is set from “OFF” to “
” or “ ”.
•When playback starts. The camcorder displays the date/time when scenes
are recorded.
•When the date is changed during playback.
The date/time does not appear.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time (
੬
pg. 9).
LCD
LCD/TV
SIMPLE
AUTO
OFF
ON
OFF
ON
OFF
ON
MANUAL MENU
VMD22 EN(02/33) 29/08/00, 14:42 29