Technicolor - Thomson VMD 22 - Manual (Page 59)

58
EN
CONNECTIONS Advanced Connections
Connection To A Personal
Computer
This camcorder can transfer still images to a PC by using
the provided software when connected as shown in the
illustration. It is also possible to transfer still images to a PC
with a DV connector-equipped capture board installed.
1 Make sure the camcorder and PC are turned off.
2 Connect the camcorder or Docking Station to your
PC using the appropriate cable as shown in the
illustration.
•To attach the camcorder to Docking Station, refer to
“Docking Station Attachment” on pg. 56.
3 Turn the camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch and turn on the PC.
To DV
OUT
To
RS-232C
DV cable*
To DV
connector
PC
connection
cable
(provided)
To PC
PC with DV
connector-equipped
capture board
PC
Core filter
Core filter
Open the
connector
cover.
* Use the DV cable provided with the capture
board.
VMD22 EN(34/65) 29/08/00, 15:16 58