Toshiba TOSLINE S20 - Manual (Page 30)

TOSLINE-S20 Active Star Coupler (ASC25) Instruction Manual 6F3B0360
TOSLINE S20 29
(2) Optical fiber cord
Any type of optical fiber cords may be applicable if only they have the transmission
characteristics of optical fiber cable, given above, and they are connectable with F07 Type
connector, further they have the following-listed mechanical strength characteristics.
Outer diameter (mm) 2.2
±
0.2
×
4.4
±
0.4mm
Weight (kg/km) 8
Allowable tension (kg) max. 25
Allowable bending radius (mm) min. 50
Table 9.2
That type of cord is used for connecting transmission modules inside of panel and for
connecting an optical fiber cable with a transmission module. We recommend the use of a H-PCF
cord that is described below.
Manufacturer: Sumitomo Electric Industries, Ltd.
Agency: Takachiho Electric Co., Ltd.
Model:
(A) Optical fiber cord with connector on one end. ( ¨¨ denotes cord length.)
2001H-M- ¨¨¨¨ DCV-HC-20/07
Cord length
Optical connector CF-2001H
DCV-HC-20/07
Figure 9.6
(B) Optical fiber cord with connector on both ends. ( ¨¨ denotes cord length.)
2001H-MM- ¨¨¨¨ DCV-HC-20/07
Cord length
Figure 9.7